STENTER MACHINE
SPECIFICATION
| Application |
Knitted, woven, warp knitted |
| Machine width |
2600mm |
| Working width |
2400mm |
| Speed |
5-100m/min |
| Chain |
Horizontal chain |
| Rail |
Lubricant free rail |
| Heating system |
Natural gas, Thermal Oil, Steam |
| Chamber |
6 chamber/ 8 chamber/ 10 chamber |
| Nozzles |
Specially nozzles for different kinds of fabric |
| Cooling |
Air cooling+ cylinder cooling |
| Fabric exit |
Plaiter+ Batching |
FEATURES:
- Fabric inlet combination is combined by fabric infeed frame, centering device, padder, speed synchronous controller etc
- Horizontal type padder, its combined by two solid roller, one is columnolid roller, the other is the drum-type solid roller.
- All the operating parameters of the machine are displayed in the same interface
- Virtual button with icon is easy for operating
- Exactly control the process of putting on needles
- Gumming unit are adjustable to meet the different processing needs
- Module design is suitable for different requirements
- Easy assembling
- Space saving construction
- Minium lubricant consumption by the direct lubrication system
- The insulation panel of the whole machine is made of 150mm thickness high density heat insulating material, it keeps the heat loss at the lowest state
- All drive device are located outside the heated chamber and are accessible from the outside
Flow Chart:
Entry → Padder → Coating device→ Operation platform → Rail+ pinning → Heat setting chamber → Air cooling → Selvedge cutting → Plaiter+ Batching
Diagram:
Audited Supplier 
){kind=link}
){kind=link}